Fixture Mount Sensors
The SENSORWORX fixture mount occupancy sensor series is an excellent solution for high bay and industrial lighting control. With its universal lens that provides excellent range and density, this sensor removes the need to classify an application as low bay, high bay, or aisleway. Additionally, integrated tabs on its chase nipple reduces installation time and fuss by firmly attaching to a fixture via a standard knockout. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched detection performance.
Sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. An internal timer is set to keep lights on during brief periods of inactivity, and is reset every time occupancy is signaled. Optional daylight detection is also available that dims or turns off controlled lighting according to the ambient lights levels present in the space.
Line voltage sensors are self-contained units that directly power from and switch 120/277 VAC. In a fixture mount application, they typically control a single fixture.
Warehouse Storage Area
Features / Fixture Mount Sensors
Universal Lens Works for High Bay, Low Bay, & AisleWay Applications
Greater Detection Range & Density than Leading Highbay 360° & Aisleway sensors
Digital Passive Infrared (PIR) Detection
Optional Dimming Output Enables Configurable High/Low/Off Operational Modes
- Snap-In Chase Nipple Makes Installation Quick
- Integrated Bracket Drops Sensor Below Bottom of Fixture
- Electronically Timed Switching Designed for LED Fixture Control
- Convenient Test Mode and Adjustable Time Delays
4.00” Diameter x 3.00” H
(10.16 x 7.62 cm)
MVOLT (120-277 VAC)
800W @ 120 VAC
1000W @ 208 VAC (2-Phase)
1200W @ 277 VAC
32°F to 122°F
(0°C to 50°C)
Indoor Use Only
Meets ASHRAE Standard 90.1
& CEC Title 24 Requirements
Universal 360° Lens
- Detects walking size motion or larger (e.g., forklifts)
- Single lens provides detection at mounting heights from 8 ft to 40 ft +
- Detection range improves when walking askew to sensor compared to directly at it
- Typical coverage radius ~1.2 x mounting height
High Bay Mounting
Low Bay Mounting
Operation Setting (* = Default)
Primary Occupancy Time Delay: Test Mode, 30 sec, 5, 10*, 15, 20, 30 min
Secondary (Dim to Off) Time Delay: 0, 30 sec, 2.5*, 5, 10 min
Ambient Light Threshold: Auto-Setpoint, 7 Preset Levels, Disabled
High Trim: 10V*, 9V, 8V, 7V, 6V, 5V
Low Trim: 0V, 1V, 2V, 3V*, 4V, 5V
LED Intensity: Low, High*
Operational Mode (Occupancy):
SWX-501, SWX-511: On/Off*
SWX-501-HL: High/Low/Off*, High/Low
SWX-511-NL: High/Low/Off, High/Low*
Sensors with an integrated photocell (models SWX-511) will turn lights on/off depending on the amount of ambient light detected. This operation makes them ideal for lighting near skylights, windows, or large bay doors.
Night Light Operation
To enhance nighttime safety in facilities equipped with 0-10V dimmable fixtures, a NightLight operational mode (NL option) is available on sensors equipped with a photocell (SWX-511). In this mode, fixtures will be dimmed and then turned completely off during periods with sufficient daylight. However, during periods with insufficient daylight (i.e. at night) lights are held at a dimmed level during unoccupied periods.
0-10V dimmable fixtures can be controlled with a high/low/off sequence of operation by adding the High/Low option (HL). With this mode, the sensors will drop the lighting level to a low setting after the occupancy time delay expires. Then, after a second time delay, the sensor will shut the fixture off completely. Alternatively, leaving the sensor’s relay disconnected will cause the fixture to stay at the full dim setting (but never turn completely off) for the duration of the unoccupied period.
- Unit works both in installations where Neutral connection is available as well as installations where only Ground connection is present.
- The unit’s two black wires are interchangeable (i.e. one connects to line power, one connects to load).
Single Phase Wiring
- Dimming wires are present on models with HL or NL option
EXAMPLE MODEL # SWX-501
|PRODUCT||DETECTION||COVERAGE||0-10V DIMMING OPTIONS||ENVIRONMENT||ADDITIONAL OPTIONS|
|SWX||Fixture Mount Sensor||-5||PIR||0||Highbay / Lowbay / Aisleway||1||None||Blank||Standard Environment||Blank||Individual Pack||Blank|
|PIR + Photocell||1||High/Low/Off Operation||-HL||High Humidity Environment||-HE||50 Pack||-J50|
|Night Light Operation||-NL|
Fixture Mount Sensors Popular Model Numbers
|SWX-501||Fixture Mount Sensor - PIR, Line Voltage, Universal 360° Lens|
|SWX-501-HL||Fixture Mount Sensor - PIR, Line Voltage, Universal 360° Lens, High/Low/Off Dimming|
|SWX-511||Fixture Mount Sensor - PIR + Photocell, Line Voltage, Universal 360° Lens|
|SWX-511-NL||Fixture Mount Sensor - PIR + Photocell, Line Voltage, Universal 360° Lens, Nightlight Dimming|