Wireless Plug Load Controller
LINE VOLTAGE
Series Downloads
Instructions
Overview
SENSORWORX wireless plug load controllers switch on/off power to connected electrical outlets/receptacles as directed by wirelessly linked sensors, photocells, and wall controls. While energy codes typically require only occupancy-based control of plug loads, this plug load controller can be wirelessly zoned together with manual controls as well.
SENSORWORX wireless plug load controllers are rated to switch fully loaded circuits and utilizes a powerful microprocessor to optimize its switching timing, ensuring long relay life even when controlling high-inrush LED lighting. As with all SENSORWORX products, these load controllers are easy to install and incorporate features which reduce contractor labor time. An elongated chase nipple with snaps for quick installation makes for a hassle free contractor experience. All SENSORWORX products are proudly made in the USA.
Applications
Individual Fixture Level Control In Spaces Such As:
-
Classrooms
-
Copy Rooms
-
Open Areas
-
Small Offices
-
Conference Rooms
-
Private Restrooms
-
Hallways
Features / Wireless Plug Load Controller
- Wirelessly Links to Sensors, Photocells, & Wall Stations
- Links in Seconds with up to 50 Remote Devices
- Switches Up to 20A @ 120 VAC
- Electronically Timed Switching (i.e. Zero Crossing) Ensures Long Relay Life
- Integrated Test/Programming Button
- Plenum Rated (UL 2043)
- Configurable Time Delays and Operational Modes (e.g. Occupancy/ Vacancy)
- Configurable Photocell Modes
Specifications
Physical
SIZE
3.00” H x 2.25” W x 1.88” D
(7.62 cm x 5.72 cm x 4.78 cm)
WEIGHT
6.00 oz.
COLOR
Blue
MOUNTING
1/2” Knockout
TEST / PROGRAMING BUTTON
LED STATUS INDICATOR
Bi-color White & Blue
Operation
OPERATING MODES
Occupancy & Vacancy
On/Off/Inhibit Photocell
Ignore Occupancy/Switching
TIME DELAY OPTIONS
1, 5, 10, 15, 20, 30 min.
1,2,4,8 hr.
Custom (via Mobile App)
Environmental
OPERATING TEMP
32°F to 122°F (0°C to 50°C)
(Standard)
-40° F/C (with -HE Option)
RELATIVE HUMIDITY
0-95% Non-Condensing
Indoor Use Only
Wireless
RANGE
80’ line of site w/o obstruction
40’ with obstruction (walls/floors)
FREQUENCY
915 MHz ISM Band
WIRELESS LINKING
Two Simple Methods:
3 sec. Push Button Process
Mobile App (via a SWX-970)
SECURITY
All Wireless Data is Encrypted
Electrical
OPERATING VOLTAGE
120 VAC
Single Phase, 50/60 Hz
LOAD RATINGS
(relays use zero-cross switching)
20A @ 120 VAC – General Purpose
MOTOR LOAD
1 HP
ESD IMMUNITY
Tested to withstand electrostatic discharge without damage or memory loss
Code Compliance
These power packs can be used to meet ASHRAE 90.1, IECC, & Title 24 energy code requirements
Wiring Diagrams
Installation Options
Wireless Linking (Pairing)
Linking a wireless load controller pack to a wireless sensor, photocell, or remote wall station is quickly done via the following procedure:
Step 1. Enter learn (pairing) mode by holding down the load controller’s button for 3 seconds until the LED starts alternating white then blue, then release.
Step 2. At the sensor, photocell, or remote wall station, hold down the programming button for 3 seconds until the LED starts alternating white then blue. Releasing will link the device with the wireless load controller in learn mode (see note 1 below). The lighting load being controlled will also be toggled off/on as a visual indication of success.
Step 3. Repeat step 2 to link additional devices.
Step 4. When all devices have been linked, exit learn mode on the load controller by pressing the button 1 time. Learn mode will also be automatically closed after 15 minutes of no new devices being linked.
Note 1: When in learn mode, the alternating LED colors on the load controller will periodically pause and blink out the total number of linked devices. There will be no blinks during the pause until the first device is linked.
Ordering Info
EXAMPLE MODEL # SWX-950-PL
| MODEL | DESCRIPTION | OPTIONS | ||
|---|---|---|---|---|
| SWD–950-PL | Wireless Load Controller for Receptacle/Plug-Load, 20A @ 120 VAC | Blank | Blank | |
| Low Temp. / High Humidity | –HE |
| ACCESSORY | DESCRIPTION |
|---|---|
| SWX-999 | Snap-On Low Voltage Wiring Chamber |
Compatible Wireless Products
Wireless Dimmer & Switch
These stylish and intuitive wall stations are designed for a 10 year battery life.
Wireless Ceiling Sensors
Available with either PIR and Dual Tech. occupancy detection, these wireless sensors can be paired with a load controller in seconds.
Wireless Wide View Sensors
With five contractor friendly mounting methods, locating a sensor in a corner has never been easier.
