Single-Pole Phase Dimmer & Switch
The SENSORWORX® phase dimmer provides manual dimming control of 120V lighting from a single location. With no minimum load requirements, this stand alone dimmer is perfect for any lighting zone. Additionally, at less than one inch deep, the unit is significantly shallower than typical dimmers. This results in less crowded wall boxes and quicker installation. All SENSORWORX products are proudly made in the USA.
- Private Office
- Conference Room
- Accent Lighting
Features / Single-Pole Phase Dimmer & Switch
Dims LED, CFL, ELV, & Incandescent Lighting Loads
- Selectable Reverse (default) and Forward Phase Dimming in Same Unit
- Overload Protection Monitors & Protects Unit From Overheating
No Minimum Load Ratings – Relay Based Switching (i.e. non-Triac)
Enclosure is 25-40% Shallower than Other Wall Dimmers (< 1” Depth into Wallbox)
- Modern Look and Individual Easy-Tap Buttons for On, Off, Raise, & Lower
Matches Styling of other SWX Wall Devices
Self-Grounding Mounting Strap
- Blue Locator LED when Lights are Off
Configurable Dimming Parameters including High/Low Trims, & Turn on Levels
White LED Indicator Changes Intensity as Dim Level is Adjusted
Settings are Adjustable without Removing Cover Plate
- Unit Retains Level Setting after Power Outage
- Programmable Dimming Curves
OPERATING VOLTAGE 120VAC, Single Phase, 50/60 Hz
MLV (consult factory)
LOAD TYPES LED Driver/Lamps, CFL, Electronic/Magnetic Ballasts (Fluorescent) Electronic Low Voltage (-ELV model) Tungsten (Incandescent) Halogen MLV (consult factory)
ESD IMMUNITY Tested to withstand electrostatic discharge without damage or memory loss.
SURGE IMMUNITY Tested to withstand surge voltages without damage or loss of operation.
NON-VOLATILE MEMORY Saves all settings even if power is disrupted.
SIZE 2.74”H x 1.68”W x 1.39”D
(6.96 x 4.27 x 3.53 cm)
<1” Wallbox Mounting Depth
WEIGHT 4.5 oz
MOUNTING Single Gang Switch Box
LED STATUS INDICATOR Bi-color White & Blue
OPERATING TEMP 32°F to 86°F (0°C to 30°C)
(for full load operation)
RELATIVE HUMIDITY 0-95% Non-Condensing,
Indoor Use Only
Dimming From a Single Location
Dimming From Multiple Locations (3-Way)
This phase dimmer is not designed for installation or usage in multiway (e.g. 3-way) applications. For dimming in those applications, the SENSORWORX wireless phase dimmer (model series SWX-874) and a wireless companion dimmer (model series SWX-854) is required.
- Designed to mount in 1-gang wall box with 3.28” hole spacing.
- Units can also share multiple gang wall boxes with other devices.
- Unit face is field removable in order to change colors. Contact factory for additional faces.
EXAMPLE MODEL # SWX-864-ELV-WH
|SWX||864-ELV||Single-Pole Phase Dimmer & Switch, 120VAC - Reverse Phase (for Electronic Low Voltage/LED/CFL/ Incandescent/Halogen) or Forward Phase||White||WH||Single Pack||Blank|
|SWX||199||Single Gang Wall Plate||White||WH||10 Pack**||J10|